













SPECIFICATION FOR APPROVAL
Bayanna Produk
CUSTOMERKlient:
PRODUCT NAMENyuɔ̈ɔ̈r: Silicon monocrystalline50WPanel solar
MODEL NUMBERModel:XDK-50W
DATEDatum:2019Saan3Pay19dɛ
APPROVED |
APPROVED |
APPROVED |
CUSTOMERKlient | ||
APPROVED |
APPROVED |
APPROVED |
Rules Gɛr Buk
Kɔmpiye Home |
|
Produksyon awowa Yɔɔr Adɛ |
PETLaminated solar panels (monocrystalline) |
Rules Gɛr |
50W
|
Panel solar laminated glass
A. Käke luɔi (working conditions)
1.A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈noutdoor use with direct sunshine)
2.Temperature de luɔi (working temperature):–40℃ ~ +70℃
II. Käke test standard(standard test condition)
1.Kuasa cahaya(luminous intensity):1000W/m2
38000Light duniŋ-40000Testing under lighting conditions (Testing under lighting conditions) (Testing under lighting conditions) (Testing under lighting conditions)
2.Temperatur(temperature):25℃
3.Humidity(humidity):30~90%
4.Atmosfere(atmosphere quality):Am1.5
A tãŋuan, Kä ye kek looi ku kä ye kek looi(main material of the products)
Chip(solar cell):Single kristalFilm( polycrystalline silicon)
Paket Material (Enclosed matreial):Anti-UV, anti-yellow, transparentPET(enduring,anti-ultraviolet radiation, high transparent PET)
Kä ye looi piny (Base material):High transparent abrasivePET(anti-transfiguration,toughened glass)
4.Fizik (physics specialty):
No deformation ye nyuɔɔth,Wala defect,Brightness.(Appearance with reflet ,without evident distortion and deficiency.)
5.Kä ye kek looi ku kä ye kek looi (parameters and specifications of products):
Performance |
|
Rated Power [Pmax] |
50W |
Power Tolerance |
±5% |
Nominal Voltage |
18V |
Design Life |
25 years |
Electrical Characteristics
Maximum Power |
[Pmax] |
50W±5% |
Maximum Power Voltage [Vmp] |
18V±3% |
|
Maximum Power Current [Imp] |
2.73A±3% |
|
Short-Circuit Current |
[Isc] |
2.75A±3% |
Open-Circuit Voltage |
[Voc] |
21.5V±3% |
Current Temperature Coefficient |
0.031%/℃ |
|
Voltage Temperature Coefficient |
-0.31%/℃ |
|
Power Temperature Coefficient |
-0.42%/℃ |
|
Maximum System Voltage |
1000V |
|
Under Standard Test Conditions(STC): Irradiance of 1000W/m2, Am1.5 and 25℃cell temperature
Mechanical Characteristics
Dimensions:670mm(L) x530mm(W) x30mm(H)
Weight:3.58kg
Solar Cells:Monocrystalline solar cells,36 cells in a 4x9matrix connected in series
Construction:Front: High-transmission 3.2mm tempered glass; Encapsulate: EVA; Back: TPT
Frame:Clear anodized aluminum alloy Color: silver
Module Warranty:
25-year limited warranty of 80% power output; 10-year limited warranty of 90% power output; 5-year limited warranty of materials and workmanship.
Module Diagram:
Module Diagram:

(Kä ye kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yen)
6.Luɔi:
1.Parameter test error ye ±0.3
2.Test electric indicator voltage parameter error is ±5%
3.Testing electrical indicator current parameter error is ± ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n5%
4.Solar cell's can't be thrown into the fire. Solar cell's can't be thrown into the fire. Solar cell's can't be thrown into the fire. Solar cell's can't be thrown into the fire.
5.Lëk ba battery polarity tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n
6.Solar panels adhil tɔ̈u në tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
7.Solar panels adhil tɔ̈ɔ̈u yɔrɔ cï thiin
8.Solar panels adhil bɛ̈n tɔ̈ɔ̈u ka cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk
A bï solar panels luɔ̈ɔ̈i ya cɔk loi rot
9.Tɛ̈n yenë yen luɔ̈ɔ̈i thïn, a dhil solar panels bɛ̈n ya tɔ̈ɔ̈u thïn ku bɛ̈n ya tɔ̈ɔ̈u thïn
Yala |
Audit |
Konfirmasiyon |
