Član VIP
ER25MN
Features: CPC slider ER25MN belongs to high assembly series straight rail, combination height is 36mm, slider installation hole is 35*35mm. To ensure
Detalji proizvoda
Kä puɔth:CPC slider ER25MN belongs to high assembly series straight rail, combination height is 36mm, slider installation hole is 35*35mm. To ensure that the machine has a high processing precision, it requires its guide rail, straight line to have a high directional precision and a good movement smoothness. CPC slider ER25MN belongs to high assembly series straight rail, combination height is 36mm, slider installation hole is 35*35mm. To ensure that the machine has a high processing precision, it requires its guide rail, straight
| Model | Size assembly | Lɛɛr dɔ̈ŋ (mm) | Dimension slider ((mm)) | ||||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | E | |
| ER25MN | 36 | 12.5 | 23 | 23 | 60 | 11×7×9 | 48 | 80.2 | 60 | 29.6 | 35 | 35 | 12 |
| Model | Dimension slider ((mm)) | Load ye cɔl (KN) | Torque static (Nm) | Weight ye | |||||||
| M×g2 | M1 | S | T | C | Co | Mro | Mpo | Myo | Slider ((g)) | Rail (g/m) | |
| ER25MN | M6×9 | - | 8 | 8 | 18.8 | 36.4 | 410 | 300 | 300 | 432 | 3020 |
Taiwan CPC Linear GuideER25MNKä ka dhiëc lëu ba looi ka tɔ̈ɔ̈u
A.CPC linear railER25MNAjuiɛɛr de machine level. Requirements: use two equal high volume blocks and a single marble scale to place on the installation base, put a precise horizontal meter debugging base level, requirement is the base mid-convex (2 ~ 3 grid). Requirements: use two equal high volume blocks and a single marble scale to place on the installation base, put a precise horizontal meter debugging base level, requirement is the base mid-convex (2 ~ 3 grid).
II.CPC linear railER25MNInstallation base roughness, flatness, linearity and the appearance of inspection. Installation base roughness, flatness, linearity and the appearance of inspection. Installation base roughness, flatness, linearity and the appearance of inspection. Requirements: When horizontal debugging is good, we must measure the plane of the main straight rail installation base with a laser interferometer (we usually use a straight rail surface on the right-hand column as the main rail) allowing 0.05mm in each 10m mid-convection, all travel straightness allowing 0.03mm mid-convection. Roughness requires 1.6, the appearance has no casting defect.
A tãŋuan,CPC linear railER25MNLɔ̈ɔ̈i de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr. Requirements: The reverse angle radius is less than or equal to 3.5mm, if the reverse angle is found too large or protruding, should be used at the time of oil stone and a knife treatment, if not, it will cause a bad installation of the guide rail accuracy or will interfere with the slider.
4.CPC linear railER25MNInstall a bottom lock thread hole processing. A sɔrɔ: ka tɛmɛ ka tɛmɛ yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen
5, ye tɛ̈n yenë kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r. Requirements: Check if the straight guide rail has a certificate of qualification, if it's damaged or rusty, clean anti-rust oil, remove the assembly surface spurts, impacting protrusions and dirt etc. Kɔɔr: Check if the straight guide rail has a certificate of qualification, if it's damaged or rusty, clean anti-rust oil, clean the assembly surface spurts, impacting protrusions and dirt etc.
Онлайн разпит
-
Kontakti
-
Kompanija
-
Telefon
-
E-mail
-
WeChat
-
Kod provjere
-
Сједност поруки
-